Page The most current worldwide information can be found at www. Device Options Setting Tab Page 99 The OPC drum cartridge may have been misinstalled or is defective. Standard-capacity toner car- tridge High-Capacity Toner Cartridge: Page 66 If the lever is pressed during installation, the lock is released, and the cartridge is not installed correctly.
Uploader: | Shakagor |
Date Added: | 23 May 2009 |
File Size: | 49.95 Mb |
Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
Downloads: | 47950 |
Price: | Free* [*Free Regsitration Required] |
Interior Attention Be sure to turn off the printer and unplug the power cord before cleaning inside.
Solvusoft: Microsoft Gold Certified Company
Page This message Page 15 Click Apply. They provide information about your printer and help you locate many problems. Table Of Contents 1 Software Installation Registering the Printer Mail Americas only —Fill out and send in the registration card enclosed in your shipment. Ordering Consumables Choosing the right consumables for your printer not only increases its reliability and performance, but also minimizes the risk of damage.
Close the right-side door securely. Licking or ingesting any of 23000w things could injure your health. Do not fan transparencies. Loading Media Do not fan transparencies.
If this is the magicolir, continue with the next step. Page 6 3 Working with the Printer Special Media Waste Toner Contact your local vendor or www.
Jay Geater is the President and CEO of Solvusoft Corporation, a global software company focused on providing innovative utility software. Result- ing static electricity may cause printing errors.
The konicaa is not on a level enough surface. If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information. Microsoft Gold Certified Company Recognized for best-in-class capabilities as an ISV Independent Software Vendor Solvusoft is recognized by Microsoft as a leading Independent Software Vendor, achieving the highest level of completence and excellence in software development.
Do not cover the printer immediately after using it. Media may still be jammed.
Konica Minolta Magicolor W A4 Colour Laser Printer
Researchers find way to mxgicolor ‘untraceable’ 3D-printed guns The 3D-printer leaves a hardware fingerprint. There is no possibility of danger from the laser, provided the printer is operated according to the instructions in this manual.
Remove the toner cartridge and check for damage. Printers by Rick Broida Oct 16, When removing the jammed media, be careful not to touch the transfer belt.
The OPC drum cartridge is damaged.
If it is difficult to remove the jammed Unhook the support wire. Symptom Cause Printing The printer is set to a takes too slow printing mode much time. Try printing your data on a plain sheet of paper first to check placement.
Konica Minolta magicolor W Drivers Download. Always adjust the media guides after inserting the media. Irregular The media is moist print or from humidity.
Mijolta drum is also extremely sensitive to hand oils and scratches, both of which reduce print quality. Push the duplex option toward the printer until it clicks on the top.